How Much Does A Backup Camera Installation Cost? [Best Guide]

How Much Does It Cost To Put A Camera In Your Car?

Are you thinking about purchasing/installing a backup camera? How much will it cost to get one? How does the price vary across different products?

Wouldn’t it be great when you finally decided to install a backup camera? Can you have the estimated costs right at your fingertips?

Find the best price of any backup camera – instantly. We go through all the major online shops and estimate the highest price among them.

I didn’t know this either until I did some research. Believe it or not, the price isn’t uniform across different stores. I’ve decided to save you time and effort and tell you exactly how much backup camera installation costs.

Table of Contents

How Much Does A Backup Camera Installation Cost?

A typical backup camera installation costs anywhere from $100 to $900; several factors can influence the cost of reverse camera installation, including the make and model of your car, where you live, and the type of camera you choose.

The average cost of a backup camera for a Jeep or SUV is different from that of a Nissan or Toyota. Likewise, the cost to install a backup camera in a BMW is not the same as a Peugeot. The complexity and setup of backup cameras for one car brand differ from others, as this also determines the cost to install a backup camera.

Find the estimated rear view camera installation cost for different brands of cars

S/NCar typesInstallation cost range
1BMWFrom $99.99 and above
2ToyotaFrom $75 to $200 and above
3PeugeotFrom $100 and above
4BenzFrom $100 to $300 and above
5FordFrom $200 to $800 and above

What You Need To Know Before Getting a Backup Camera

There are many different types of backup cameras on the market, and they come in a variety of prices. Before purchasing a backup camera, you will need to consider the installation cost and how much you’re willing to spend. 

You should also decide what type of backup camera is best for your needs. Many resources help you make this decision, such as the best backup cameras list.

Factors that Affect Backup Camera Installation Costs

Various factors can affect the cost of having a backup camera installed in your car. The make and model of the car is one factor, as luxury vehicles may have more expensive components that need to be replaced or added during the installation process. 

Camera specs also matter- higher resolution cameras are typically more expensive than lower-rest, depending on how much they cost and their models. 

Finally, where you live can also play a role in how much you pay for a batch vary from place to place.

Other factors that affect rear view camera installation cost include the following:

The type of camera

There are a variety of cameras on the market, each with its advantages and disadvantages. Cheap cameras tend not to have as many features as expensive cameras, and the high-end cameras include a much bigger setup with display monitors and many other features like trackers. 

Depending on how much they cost, there may be a difference in the quality of the photos or videos taken by different cameras.

The features of the camera

When installing a car camera, it is important to make sure that the camera is compatible with the car. The cost of the camera can vary depending on its features and reality

When purchasing a car camera, some factors are the review edge, viewing angle, and night vision.

Whether the Backup Camera installation is waterproof or not

Waterproof backup cameras can be installed on the car, and there are ways to keep the camera dry and watertight. The wire from the camera should face up and not down, preventing any moisture from getting in. this makes the installation process more complicated and inflates your installation cost.

Additional wiring that may be necessary

If the vehicle is equipped with a backup camera, additional wiring may be necessary. If this is not done t, the camera will not work properly, and there could be other potential issues. These additional wiring can cost up to $100.

How Complicated The Installation Process is.

I’ve never installed a backup will be difficult to find the exact cost. The installation process involves more than just buying and installing a new camera system in your vehicle. You’ll need to consider the labor costs and any additional components that you may need for your specific vehicle.

The size and type of vehicle dedicated to installing a backup camera in your veh to prove the article, and the more it will cost. If you have a car with very limited space behind the bumper or have to cut out any metal, then it will cost you more than if you have an SUV. The type of vehicle will also determine the costs since some vehicles are easier to install a backup camera in than others.

An Expert Guide To Installing a Backup Camera (Step By Step)

Installing a backup camera is not hard once you have a good guide.

Let’s get this out of the way: you do not need to be a mechanic to install one. Towill will show you how I installed my backup camera.

To prove that that being said, when it comes time to put your hands in a car’s guts—that is where you might learn something new or need help from someone who has done it before (or at least read a good guide like this one).

If installing a backup camera seems daunting because of all that terminology and those tools, don’t worry! It’s very easy once you know what each part does and how they fit together. Most people will probably already have all of the tools needed for this project lying around their garage or toolbox (except for perhaps an oscilloscope).

Even if you don’t have these tools, just grab some pliers and a screwdriver from your kitchen drawers… I’m pretty sure your wife won’t mind if it means she gets her car back faster!

Step 1: Check Your Car’s Compatibility

So, you’re ready to install a backup camera? Great! But first thing’s first: make sure your car is compatible with backup cameras. First, check your car’s manual to see if the camera is compatible with your car. Second, check whether or not your reverse light can be used for your backup camera. If it cannot be used, consider using the license plate light instead.

Step 2: Find the Best Place to Install the Backup Camera

Now that you’ve figured out where to mount your backup camera, it’s time to install it. Since the camera makes this whole thing work, you don’t want to skimp on the quality of the installation. We will talk about some of the challenges you might face and how best to overcome them.

Step 3: Connecting Backup Camera Power Supply

You’ll need to connect the power cable to the backup camera. If you don’t do this, none of your hard work will have been worth anything. Once you’ve done that, you’ll want to connect the power cable to a suitable power source, like a fuse box. 

You may need a professional’s help (i.e., someone who knows what they’re doing). This also may be an ideal time to reconnect your battery and then test out your backup camera, just in case things haven’t completely fallen apart on you yet.

Step 4: Mounting the Backup Camera

This is the final step in affixing the backup camera to your car. We recommend that you mount it as low as possible while still providing a clear view of what’s behind you, but you’re free to choose whatever location works best for you and your vehicle.

The most popular way to do this is by mounting it in the trunk handle; if that doesn’t work, there are several other areas of your car where it could be mounted, including:

  • Just below the third brake light (most common area)
  • On a license plate frame (requires drilling holes)
  • In the bumper or grille (may require removing parts of the body or bumper)

Step 5: Install Wiring Harness

Once you’ve snaked the Backup Camera Wiring Harness through the car, you’ll need to connect it to the backup light and the monitor. If your wiring harness has a switch-like module attached to it, this is where we’ll use it.

Once all of your connections are made, conceal them against either side of the trunk. Be sure that none of the wires are hanging, or else they may get ripped out when you close your trunk or hatchback door.

Step 6: Making the Final Connection

Connect the cables to the video input of the monitor. If you’re using a dedicated camera display, you should find that it does not need a further connection to your vehicle’s audio system. This can be useful if your car wasn’t available with a factory-installed backup camera and you wish to keep stock equipment intact.

Important Tips To Save Money on Install a Rear View Camera in Car

There are a few ways that people can save money on a backup camera installation. The first is to research and find a reputable business with good customer reviews. Many DIY rearview camera kits are available for purchase or installation, saving people some money if they’re comfortable doing the work themselves.

 Finally, reading and rereading the instructions is important before starting the installation process. This will help ensure that everything goes smoothly and there are no surprises. Following these tips below should help make the installation process easy and painless!

Get a waterproof backup camera

A waterproof backup camera is a great option for anyone who has concerns about whether they will be able to see in the rain. This type of camera is usually built inside to withstand water coming in through the window, but it is not suitable for people who need to see outside. 

Waterproof Backup cameras last longer than traditional backup cameras, as they do not have to be replaced as often. Installing a waterproof backup camera is an easy job for someone with experience with car repairs and maintenance.

The cost of a waterproof backup camera depends on the make and model of the car installed.

Use a Wired Reverse Camera System Instead of a wireless system

One of the most important tips on saving money when installing a rearview camera in your car is to use a wired reverse camera system instead of a wireless one. The main reason for this is that wireless systems are usually more expensive than wired ones.

Wired cameras have some disadvantages, but one of the main advantages is that they don’t need batteries to power them and will always work.

On the other hand, wireless cameras have to be powered by batteries and can run out of power at the most inconvenient times.

Another thing to consider is that a wireless camera will need to be connected to a power source, which will add to the overall cost of installation.

Wireless cameras can also have interference problems that cause them not to work properly. When installing a wireless camera, it is important to consider the layout of your home and where you want the cameras placed.

Choose a car with a backup camera pre-installed

There are many different types of cars on the market, and some come with a backup camera preinstalled. In this case, there is no need to worry about how much installation costs or if the car supports a rearview camera.

Newer models of cars come preinstalled with reverse camera systems. However, if you drive an older model car or one that does not have a built-in camera system, you may need to determine how much it will cost to install a rearview camera.

The average cost to install a backup camera is $150, but this will vary depending on the car and your type of system. If you want to save this cost, you should go to a newer model car.

Install the camera yourself

The installation process is easy, but it can be tricky to attach the monitor.

Make sure to connect the cables and power before mounting the camera.

Test the camera before driving on public roads.

What are the best features to look for in a backup camera

First, it is important to know what features you want to see in a backup camera. If you do not know what you want, how can you possibly make a purchasing decision?

You should also decide why you need a backup camera. Do you just want it so that you can park better? Or do you need it for safety reasons? After all, some very good insurance discounts are available if your car comes with a backup camera. 

This can be a bonus when looking at the benefits of having one installed on your car.

A good backup camera has a wide-angle lens.

A wide-angle lens allows for better visibility behind the vehicle when backing up—this reduces blind spots so that no object goes unseen. This lens type can save you money by reducing accidents behind your car because it helps prevent them in the first place! 

You’ll also save time while pulling out of parking spaces as there will be fewer objects blocking your way due to this feature’s wider view angle capability when compared with non-wide angle lenses on other cameras like those used by commercial businesses such as Walmart (which typically only have 120-degree horizontal viewing angles).

Backup cameras with wide-angle lenses are best for larger vehicles with longer blind spots. If you’re the proud owner of a full-size truck or large SUV, you should get a backup camera with at least 110 degrees field of view to cover your vehicle’s blind spots. On the other hand, smaller cars don’t need such wide backup cameras since they don’t have as much space behind them to maneuver.

Good quality rainproofing

Rainproofing is great because it can protect the camera and its wiring connections from rain damage and corrosion. It’s also important to consider how weatherproof the camera housing is since some are only designed to handle light rain. 

The last thing you want is for a downpour of sleet and snow to ruin the camera’s functioning. A fully waterproof backup camera with excellent rainproofing can be left out in sun, sleet, or snow without any worries about damage.

A good night vision feature is also essential for your backup camera.

A good night vision feature is also essential for your backup camera to see clearly at night, in low-light conditions, and when it’s raining. The best backup cameras will have infrared night vision to see through the dark.

Your new backup camera should have a rainproofing feature.

You’re shopping for a backup camera, and you should know it will be outside. You want something that can withstand the elements, particularly rain. If there’s any sort of watertight seal for when it’s raining, you’ve got yourself a winner. After all, if you live somewhere humid and rainy, your camera will probably be getting pretty soaked.

The resolution on your backup camera is important too.

To understand the resolution of a camera, you must know what pixels are. Pixels are the little dots that make up an image on a screen. The greater the number of pixels in the image, the higher its resolution. The resolution is measured by how many horizontal lines you can see on your monitor.

Suppose you have a high-resolution backup camera and a low-resolution monitor. In that case, it won’t matter because your monitor will display less information than your camera can capture. 

On the other hand, if your backup camera has a low resolution and high-resolution monitor, you won’t see much detail in the images from your backup camera because it’s not picking up enough information to display on your high-resolution monitor.

The image clarity depends on the sensor on the camera.

A sensor is the most important part of a camera. It determines the resolution and dynamic range of an image. Resolution is the number of pixels captured by the sensor, so it’s also called “pixel density.” The higher the resolution, the clearer your video will be. 

The dynamic range is how many light and dark levels your image can capture at once. It plays a role in how bright or dim your video will appear if you’re backing up in poor lighting conditions.

Make sure your new backup camera comes with a good set of installation instructions.

Fact: no one is born knowing how to install a backup camera. Fortunately, if you find yourself in this situation, you don’t have to wing it! The best backup cameras come with thorough guides that take you step-by-step through the installation process. 

Have a look at the required tools, materials, and estimated time for installation before deciding on which backup camera to purchase. If the guide does not appear to cover everything you will need or want to know about installing your new device, consider looking into another model.

Comparison of best backup cameras

When it comes to backup cameras, there are various factors that shoppers should consider before making a purchase. One important factor is the video quality of the camera. Another factor is the features offered by the camera. Finally, price is always an important consideration. 

Yakry offers a digital wireless backup camera that is ideal for use with trailers up to 45 feet long. The camera is fog-resistant and has a viewing angle of 150 degrees. The backup camera can be set to run constantly or be turned off when not in use. Backup camera shoppers should consider factors such as video quality, features, and price when making a purchase

.Below are some of the best Reverse camera editors have picked out and reviewed:

Electronic Hubs, Nerd Techy and

S/NBackup camera typeDescriptionCost in dollars
1Pyle PLCM4550 Rearview It provides an original look of objects behind the car and could be expensive at timesThe average cost is $68.29
2Pioneer ND-BC8This high-quality NTSC universal camera displays a mirror image on your tuner’s screen, giving you a full view of everything the rearview mirror fails to show. The high-sensitivity camera has a 129-degree wide viewing angle. The embedded CMOS sensor automatically adjusts brightness in light or dark driving conditions. With a high resolution, the sensor is as accurate as sensitive. It is one of the top three most expensive backup cameras.The average cost is $99.99 
3Digital wireless reversingIt has a high positive review, with buyers having confidence in it. It has a high resolution and makes you see objects and cars behind you easily. Its cost is high.The average cost is $95.99
4Amtifo A7 HD 1080P It has advanced display controls. It is also nicknamed the value for money backup camera as it gives car owners everything they want in a backup camera. It has one of the best navigation functions. It is quite expensive, with its cost on the high sideThe average cost is $170.10
5Digital wireless rearviewIt is a well-made backup camera with an excellent performing system that is easy to use. It is also one of the costliest backup cameras.The average cost is $113.15

We have listed other backup camera types below:

CRIXHLIX Vehicle Backup Camera, Waterproof Car Rear View with HD 1080p Night Vision

The CRIXHLIX Vehicle backup camera is a high-quality product with many features perfect for various uses. Our camera is IP68 waterproof, meaning it is completely sealed and can be used in all weather conditions. It also has a wide 140° view and night vision, allowing you to see what is happening around your car. 

This camera has an adjustable angle, always getting the perfect view. Finally, our backup camera comes with a 6-26V universal car power supply, making it compatible with most vehicles.

ZEROXCLUB HD Car Backup Camera 6 Auto LED Lights Night Vision

This HD car backup camera is perfect for anyone who wants to increase their safety while driving. It provides a clear resolution of 720p and six auto LED lights to help you see in the dark. Additionally, it is universal with most license plates and easy to install.

This backup camera is easy to install and compatible with various license plates, such as those on trucks, vans, and campers. The 6 LED lights provide clear night vision to see what’s behind you even in the dark.

AMTIFO A7 HD 1080P Digital Wireless Backup Camera with 7 Inch DVR Monitor

This backup camera system is perfect for anyone looking for a reliable, easy-to-use wireless system. The dual-camera setup gives you a view of what’s happening in both the front and back of your car, and the large 7-inch display makes it easy to see what’s going on. Plus, the digital wireless module ensures a clear picture without any interference.

The AMTIFO A7 HD 1080P Digital Wireless Backup Camera is a newer camera that has been improved by at least 50%. It is waterproof and weather-resistant, making it the perfect choice for any backup camera needs. Additionally, it has a 69 IP rating, which can withstand difficult weather conditions. 

The camera also records function and loop recording when the memory card becomes full.

EVERSECU 4pcs Wireless Vehicle Backup Cameras Plus 7″ Monitor Parking Assistance

The Eversecu 4pcs Wireless Vehicle Backup Cameras Plus 7″ Monitor Parking Assistance system is perfect for monitoring your car while backing up. It comes with a monitor and four wireless HD backup cameras with 18 LED lights each. The camera is also waterproof and mudproof, making it the perfect addition to any vehicle.

The cameras are easy to install and come with a remote controller, making it easy to get the perfect view. Plus, the 12v-24v connection ensures that you’ll be able to use this system in any vehicle.

Furrion Vision S 7 Inch Wireless RV Backup System with 1 Rear Sharkfin Camera

The Furrion Vision S 7 Inch Wireless RV Backup System with a 1 Rear Sharkfin Camera is a great option for those looking for a backup camera system. The basic kit starts at $194.99, while the advanced kit is $849. 

You can fully customize both kits based on your needs and preferences. RV camera kits compare the best backup cameras on the market, and the different types of RV camera kits are explained in detail.

Nuoenx Wireless Backup Camera, 4.3 Inch Monitor Rear View Camera System for Cars, Trucks, RV, Trailers

The Nuoenx Wireless Backup Camera is a high-quality camera that is perfect for use in various vehicles. A 3-inch monitor and a rearview/front view backup camera provide great resolution and clarity. It is also built with the IP68K waterproof standard, making it resistant to water and weather damage.

This wireless backup camera system is perfect for a variety of vehicles. It has high resolution and high definition, making it easier to see what is behind you. 

The camera also features a wide-angle lens to see more of your surroundings. Additionally, the monitor can be powered by a cigarette lighter or fuse box, making it easy to install.

HD eRapta ERT01 Backup Camera Rear View License Plate Reverse Camera

The HD eRapta ERT01 Backup Camera is a rear license plate camera designed for international use. It meets the IP 69 waterproofing standard, which can be used in all weather conditions. Additionally, the camera is compatible with 2004-2020 model vehicles.

This backup camera kit is a great option because it is very easy to install. The wires are straightforward, and it comes with a monitor that has a car charger, can be hardwired, or uses a 26ft RCA cable. This saves time during installation and makes the process much simpler.

AUTO-VOX CS-2 Wireless Backup Camera Kit with Stable Digital Signal

The Auto-Vox CS-2 is a great choice for a backup camera system because it is easy to install and has great picture quality. The camera angle is not as wide as some other options, but customers will still be satisfied with the purchase. 

The best car backup cameras are more expensive than backup camera systems, but they offer higher performance and are worth the investment.

FAQ about Backup Camera Installation

Below we answer other most important questions about backup camera installation:

What is a backup camera system?

A backup camera system consists of a video display and a digital signal processor. The DSP processes the image from the rearview mirror or headrest display and converts it into a signal that can be viewed on the monitor.

Installing a rearview camera can take anywhere from 30 minutes to 2 hours, depending on the make and model of your car. Professional installation is always recommended to ensure that the camera is properly aligned and functioning correctly.

What is the cost of a backup camera installation?

The cost of a backup camera installation may vary depending on the type of camera system you choose and the size of your vehicle. However, most backup camera systems are relatively affordable and offer several benefits, including improved safety and security, reduced wear and tear on your vehicle, and peace of mind while driving.

What are the features of a backup camera system?

When looking for a backup camera system, there are several factors you need to consider. 

The first is compatibility- what car model is your backup camera system meant for? 

Second is the angle of view- how wide of an area will the camera be able to see? 

Third, you should be aware of common installation problems and how to solve them. Finally, decide if you want a wired or wireless backup camera.

Do I need to install wires for a backup camera?

It is not necessary to install wires for a back up camera if you are just installing it on the exterior of your vehicle. Some cameras can be plugged into any 12-volt outlet, which will provide power to the camera. 

You may need extra wiring if you are installing it on the inside of your vehicle. This will depend on how you want to install it, but you may need to hire an electrician if you need help with wiring.

Is a backup camera installation difficult or expensive?

A backup camera installation is relatively low-cost and easy to install. It should take less than two hours, with only the most basic tools at your disposal.

If you install a wireless backup camera, you will need to run an antenna cable from your backup camera to the display unit.

This is a small wire that can be hidden in various ways, but it should not be too difficult to run the cable from the camera to the display unit.

This is one of those projects that anyone can do with a basic understanding of how car electronics work and what tools are needed.

What’s the difference between a backup camera and a rear-view camera?

A rearview camera is a small camera that can be mounted on the back of your vehicle. It’s typically smaller than a backup camera and doesn’t have as long an antenna cable. It’s more affordable, but it doesn’t offer the same viewing range as a backup camera.

A rearview camera is mainly used for parking and maneuvering in tight spaces.

Do you think a wired or wireless backup camera is the better option?

A wired backup camera is typically less expensive than a wireless one. The signal range will be shorter, but it will still work as long as you have an open line of sight between the camera and monitor.

A wireless backup camera will require a power source but can be more flexible as it’s not tied to an open line-of-sight like the wired one.

A wired backup camera can do everything a wireless camera can do for functionality, so there are not many differences.

How powerful are backup cameras?

A backup camera is a device that creates an image of what’s behind a car. A rearview camera is another type of backup system which uses mirrors and sensors to show drivers what’s behind the car.

Rearview cameras are often cheaper and easier to install than backup cameras because they don’t require a large monitor or mirror, but these devices can be distracting.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Scroll to Top